Select Page

Pressiza 71 (Kapton)

Pressiza 71 is a 2 mil (50 μm) polyimide film with a permanent high temperature pressure sensitive acrylic adhesive and a white finish with high opacity and gloss, specifically designed for thermal transfer printing.

Applications: It is the ideal label to support the processes of the surface mounting plate, either on the upper or lower side of the plate. It can also be used on the top of the board in mixed processes, and it is recommended for the bottom side that is directly exposed to the wave solder environment.

The surface that you want to label should be clean, dry and free of any surface contamination, such as dust, oil or rust. Isopropyl alcohol would be a recommend solvent to clean the surface.
When you apply the label, you must use firm pressure to increase the physical contact of the adhesive with the surface of the product.
Pressure sensitive adhesives will provide stronger bonds to a warm surface, as compared to a colder surface.

Suggested applications
PCB manufacturing
Component tracking
High resolution printing
IC labeling for work in process, permanent ID & warranty labeling
Product ID, asset tracking
Anywhere a label will be exposed to extreme temperatures.

Important:
Pressiza 71 in combination with the appropriate thermal transfer ribbon, passes the requirements of MIL-STD-202G, Notice 12, Method 215K.

Get a quote

  • This field is for validation purposes and should be left unchanged.